This is the steps on how to Use GM TECH2 Scanner to Program ECU with SPS (Service Programming System) in TIS2000 with usbkey.

Kindly notice: Before using the SPS, make sure that the Tech 2 scan tool and the pc contain the latest software, the battery of the vehicle is fully charged, only the ignition is on power, and all cables are connected properly. TIS2000 can only work gm cars until 2007, and software must work together with TIS2000 USB key. If you need to program Saab ECU, you had to use Saab TIS2000 and USB dongle.

Procedure:

Step 1: Instruction for TIS2000 software

Step 2: Data request

Step 3: Data exchange

Step 4: Program ECU

Alternative Programming with “Pass Thru”

Check Programming result

Step 1: Instruction for TIS2000 software

1.Connect the Tech II to the pc.

Note: The hardware key (HWK) has to be registered prior to working with ‘Service Programming System’. To register a hardware key, the form that is enclosed with the hardware key kit has to be filled in and sent to the address at the top. In case the form is missing, the document is also in the TIS 2000 newsletter (see icon in the TIS 2000 tool bar). At first, the user receives a temporary code until the key is registered on the next TIS 2000 CD.

Hardware keys that have already been registered are still valid!

To register the hardware key select ‘Hardware Key Registration’ in the menu ‘Configuration’.

TIS2000 installation video guide

  1. Start TIS 2000 on the pc.
  1. Select the application ‘Service Programming System’ on the TIS 2000 start page.

Tech2-program-ecu-with-sps-in-tis2000-1

4. On ‘Select Diagnostic Tool and Programming Process’ (picture below) screen make the desired selection for

1) the used Tech2 diagnostic tool

2) the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU

3) the ECU location.

Tech2-program-ecu-with-sps-in-tis2000-2

  1. Click “Next” button to continue.

Step 2: Data Request

  1. Connect Tech 2 scanner to vehicle. Power on device – “Tech 2” is displayed on the screen, then press “ENTER”.
  1. Turn ignition to ON without start the engine!!!
  1. Select “F1: Service Programming System (SPS)” in the main menu.
  1. Press “F0: Request Info” on Tech 2.
  1. If Tech 2 has already stored vehicle data they will be displayed now. In that case, Tech 2 asks you to either use the current data (hold data) or request further information from the ECU (continue).
  1. For the selection of “Next” the vehicle has to be identified as requested by Tech 2.

Note: Depending on the model year and the selected model either a reprogramming of the ECU (F0: Engine) or of the TCM (F1: Transmission) can be selected.

  1. During the Request Info the Tech 2 receives information from the selected device. If the ECU was replaced a “Request Info” has to be performed for the NEW unit. Since the new ECU is not programmed on delivery, the retrieved information is not complete. For that reason, TIS 2000 gives instructions as how to enter the missing vehicle data.
  1. Follow the instructions on the Tech 2. Then press “Exit” on the Tech 2, switch it off and disconnect it from the vehicle.

Step 3: Data exchange

  1. Connect Tech 2 to the pc, switch it on, and click on ‘Next’ on the pc.
  2. Confirm VIN or, if necessary, enter correct VIN, then select ‘Next’
    .Tech2-program-ecu-with-sps-in-tis2000-3

    1. Validate vehicle data and, if necessary, change with the pull-down menus.
    2. Click on ‘Next’. Button

Tech2-program-ecu-with-sps-in-tis2000-4

5.A new window displays a “Summary” (follow below) with the selected data. Continue with ‘Next’. Select “Reprog” button to download the latest calibration data onto the TechII diagnostic tool.

Note: It is not possible to reprogram an ECU with the same software version.

Tech2-program-ecu-with-sps-in-tis2000-5

  1. The window ‘Transfer Data’ is displayed. A bar shows the progress of the download.

At the end of the download, a window is displayed with the request to connect the Tech 2 to the vehicle in order to finish the programming process.

Tech2-program-ecu-with-sps-in-tis2000-6

  1. After the closing of the SPS application the TIS 2000 start screen is again displayed. Finally, switch off the Tech 2 and disconnect it from the pc.

Step 4: Program ECU

  1. Connect Tech 2 to the vehicle.
  2. Switch on Tech 2 – start screen appears.
  3. Turn ignition (Do not start motor!).
  4. Press “Enter” in the Tech 2 start screen.
  5. Select “F1: Service Programming System” in the main menu and then “F1: Program ECU”.
  6. Follow the instructions on the Tech 2 screen.
  7. During the download the Tech 2 screen shows the message “Programming in Progress”.
  8. At the end of the download the Tech 2 shows the message “Programming was successful”. The button “Exit” leaves the program. First, turn off the ignition of the vehicle, then switch off the Tech 2 and disconnect it from the vehicle.
  9. Turn off ignition for 30 seconds before starting the motor. Additional information is available in the section “Check programming”.

Alternative Programming with “Pass Thru”

In addition to the procedure described above, there is an alternative programming mode called “Pass Thru”. In that case, the data are directly downloaded from the pc to the ECU in the vehicle.

Although the Tech 2 is still needed in that mode, the data entry and the download control is done directly at the pc. Altogether, that method is faster, and it is recommended when a pc with TIS 2000 is within 3m of the vehicle.

  1. Connect Tech 2 to the vehicle.
  2. Connect Tech 2 to the PC switch on Tech 2.
  3. Start TIS 2000 on the PC.
  4. Select the icon ‘Service Programming System’ (Fig. 1) on the TIS 2000 start page.
  5. Start TIS 2000 on the PC.
  6. On the screen ‘Select Diagnostic Tool and Programming Process’ (See picture below) make a selection for

***Pass-Thru mode

***the reprogramming of an ECU that was not exchanged or the replacement/programming of a new ECU

***the ECU location.

Then clock ‘Next’ button.

Tech2-program-ecu-with-sps-in-tis2000-7

Check programming result

After every repgrogramming of an ECU a test to check the successful programming has to perform as follows:

  1. turn off ignition
  2. wait for at least 30 seconds
  3. start motor to confirm the successful programming
  4. If the motor doesn’t start this points at an error. After the replacement of an ECU it has to be made sure that the necessary programming of the immobilizer was successful.

 

Today i wanna share how to use the xhorse vvdi mb bag tool, i take these problems as an example: 

steps on W221 W204 all key lost, change W204 ESL and get a new ESL for W204

If W221 all key lost

You have used/second handed EIS with working key, you can do like this for W221 all key lost

  1. Read all key lost EIS data-> save EIS data
  2. read used EIS data enter password, get erase password->renew used EIS.
  3. Load step1 EIS data to renewed EIS with password->write EIS data
  4. Load EIS data (with key password)->prepare key file
  5. Input new key to device IR reader->load key file->write
  6. Insert new key to EIS->EIS will learn the new key->key learn success

By the way, if your all key lost W221 is Motorola EIS, not need to change EIS, remove eis get eeprom by programmer (VVDI PROG).

Then load eeprom to VVDI MB TOOL prepare key file.

 

if W204 all keys lost

Currently version W204 all key lost steps: (user should buy a new EIS first)

  1. Read EIS data via obd, then Save EIS data
  2. adapt ESL: Read ESL data->Get Erase Password->Renew ESL
  3. Change new EIS, Load EIS data(step1)->write Key Password(enter manually and at random)->Write EIS data
  4. Personalize W204 ESL
  5. Load EIS data (with Key Password)->Prepare Key File
  6. Input new Key to device IR reader->Load Key file->write
  7. Insert new Key to EIS->EIS will learn the new key->key learn success

Steps: Change W204 ESL

Question: In garage I have Mercedes w204 2008 year. Problem is ESL stop working check ESL and it damage. I buy second hand. Read original ESL read EIS all write to new (second hand) ESL, change VIN code and ESL start work , but ignition if I turn key not work.

Please refer to change W204 ESL steps:
ESL: Clear TP, Renew ESL (need erase password)
EIS: Renew EIS(need password & erase password)
Write EIS data back, then Personalize W204ESL

0ne token for read key code

How to get a new ESL for W204? 

1 get key password
2 save EIS data with Pass
3 renew EIS
4 write saved EIS data
5 renew ELV
6 in EIS personalize ELV
7 Insert Key all should work

xhorse-vvdi-mb-bga-tool-update-9

 

 

 

Now our website launch a new item named:

Original Xhorse VVDI PROG Programmer Frequently Free Update

Now we have upload the software on the website, you can download here: https://mega.nz/#!OsAmDB5J!umDGrV1N6jVFMUsVYjxoGC3ixTi9SGXLUQ1tV3IRW3A

password:123456

TOP 6 reasons to get V4.4.4 VVDI PROG Programmer 

1. Built-in update software: Make VVDIProg firmware update timely. Latest Software Version: V4.4.6, Firmware Version: 1.2.2
2. High-speed USB communication interface: Make software automatically connect.
3. Smart operation mode: possible causes of error will be listed
4. Reserve ports: For future update.
5. Self-test function: Check if the machine works well or not.
6. Power supply: Through USB cable, software will automatically prompt if the external USB power supply is needed

vvdi-pro-new-15

v4.4.6              (2016-06-23)
* This version DON’t need update
firmware
* Fix some bugs
* Fix Chrysler 300C IMMO diagram
error
+ Add VVDI PROG USER MUNUAL 4.4.6
version in Doc folder
+ Add MC68HC(9)08_MASK_ID.cfg file
in software folder,list the
corresponding MC68HC(9)08 seires
chip type of MASK ID
+ Add HC08AB16A_EEP,
HC08AS20_EEP,
HC08AS32_EEP,
HC08AS32A_EEP,
HC08AZ0_EEP,
HC08AZ16_EEP,
HC08AZ24_EEP,
HC08AZ32_EEP,
HC08AZ32A_EEP,
HC08AZ48_EEP,
HC08AZ48A_EEP,
HC08AZ60_EEP,
HC08AZ60_EEP(1J35D),
HC08AZ60A_EEP,
HC908AB32_EEP,
HC908AS32A_EEP,
HC908AS60_EEP,
HC908AS60A_EEP,
HC908AZ32A_EEP,
HC908AZ60_EEP,
HC908AZ60_EEP(4J74Y),
HC908AZ60A_EEP,
HC908AZ60E_EEP,
HC08AS20_EEP_SECURED,
HC08AS32_EEP_SECURED,
HC08AS32A_EEP_SECURED,
HC08AZ0_EEP_SECURED,
HC08AZ16_EEP_SECURED,
HC08AZ24_EEP_SECURED,
HC08AZ32_EEP_SECURED,
HC08AZ32A_EEP_SECURED,
HC08AZ48_EEP_SECURED,
HC08AZ48A_EEP_SECURED,
HC08AZ60_EEP_SECURED,
HC08AZ60A_EEP_SECURED,
HC908AB32_EEP_SECURED,
HC908AS32A_EEP_SECURED,
HC908AS60_EEP_SECURED,
HC908AS60A_EEP_SECURED,
HC908AZ32A_EEP_SECURED,
HC908AZ60_EEP_SECURED,
HC908AZ60A_EEP_SECURED,
HC908AZ60E_EEP_SECURED options
in <2-MCU>->

+ Add MC9S08GW32_UNSECURED,
MC9S08GW64_UNSECURED,
MC9S08JE64_UNSECURED,
MC9S08JE128_UNSECURED,
MC9S08LC36_UNSECURED,
MC9S08LC60_UNSECURED,
MC9S08LH36_UNSECURED,
MC9S08LH64_UNSECURED,
MC9S08LL8_UNSECURED,
MC9S08LL16_UNSECURED,
MC9S08LL36_UNSECURED,
MC9S08LL64_UNSECURED,
MC9S08MM32_UNSECURED,
MC9S08MM32A_UNSECURED,
MC9S08MM64_UNSECURED,
MC9S08MM128_UNSECURED,
MC9S08QB4_UNSECURED,
MC9S08QB8_UNSECURED,
MC9S08QE4_UNSECURED,
MC9S08QE8_UNSECURED,
MC9S08QE16_UNSECURED,
MC9S08QE32_UNSECURED,
MC9S08QE64_UNSECURED,
MC9S08QE96_UNSECURED,
MC9S08QE128_UNSECURED,
MC9S08RC8_UNSECURED,
MC9S08RC16_UNSECURED,
MC9S08RC32_UNSECURED,
MC9S08RC60_UNSECURED,
MC9S08RC8_UNSECURED,
MC9S08RC16_UNSECURED,
MC9S08RC32_UNSECURED,
MC9S08RC60_UNSECURED,
MC9S08RD8_UNSECURED,
MC9S08RD16_UNSECURED,
MC9S08RD32_UNSECURED,
MC9S08RD60_UNSECURED,
MC9S08RE8_UNSECURED,
MC9S08RE16_UNSECURED,
MC9S08RE32_UNSECURED,
MC9S08RE60_UNSECURED,
MC9S08RG32_UNSECURED,
MC9S08RG60_UNSECURED options
in <2-MCU>->
+ Add EIS-W203(1J35D),
EIS-W203(1J74Y),
EIS-W203(2J74Y),
EIS-W203(3J74Y),
EIS-W203(4J74Y),
EIS-W220(W215)(1J35D),
EIS-W220(W215)(1J74Y),
EIS-W220(W215)(2J74Y),
EIS-W220(W215)(3J74Y),
EIS-W220(W215)(4J74Y),
EIS-W639(0L02M),
EIS-W639(1L02M),
EIZ-W203(HC12),
EIZ-W209(HC12),
EIZ-W211(HC12),
EIZ-W219(HC12),
EIZ-W220(HC12),
EIZ-W230(HC12),
EIZ-W169(ST12) options
in <4-IMMOBILIZER>->
+ Add RANGE-ROVER-EWS(2004-08) option
in <4-IMMOBILIZER>->
+ Add VECTRA(2004-08) option
in <4-IMMOBILIZER>->
+ Add ARRIZO7,
ARRIZO-M7 options
in <5-DASHBORAD>->
+ Add CHANGAN-STAR-9,
CS75(2014),
RUIXING options
in <5-DASHBORAD>->
+ Add MONDEO(2004-07) option
in <5-DASHBORAD>->
+ Add YINGLUN(2012) option
in <5-DASHBORAD>->
+ Add HONDA(2014-) option
in <5-DASHBORAD>->
————————————-
v4.4.5              (2016-05-25)
* This version DON’t need update
firmware
* Fix some bugs
* Fix MC9S12XE seires write
P-FLASH bug
(write BMW FRM bug)
+ Add VVDI PROG USER MUNUAL in
Doc folder
+ Add 12V power output status in
software
+ Add MC9S08LG16_UNSECURED,
MC9S08LG32_UNSECURED,
MC9S08MP12_UNSECURED,
MC9S08MP16_UNSECURED,
MC9S08SC4_UNSECURED,
MC9S08SG4_UNSECURED,
MC9S08SG8_UNSECURED,
MC9S08SG16_UNSECURED,
MC9S08SG32_UNSECURED,
MC9S08SF4_UNSECURED,
MC9S08SV8_UNSECURED,
MC9S08SV16_UNSECURED options
in <2-MCU>->
+ Add MC68HC12BC32_UNSECURED,
MC68HC12BE32_UNSECURED,
MC68HC912B32_UNSECURED,
MC68HC912BC32_UNSECURED,
MC68HC912BD32_UNSECURED,
MC912D60_UNSECURED,
MC912D60A_UNSECURED,
MC912DG128_UNSECURED,
MC912DG128A_UNSECURED,
MC68HC912BD32_SECURED,
MC912D60_SECURED,
MC912D60A_SECURED,
MC912DG128_SECURED,
MC912DG128A_SECURED options
in <2-MCU>->

+ Add MC9S12H128_UNSECURED,
MC9S12H256_UNSECURED,
MC9S12H128_SECURED,
MC9S12H256_SECURED options
Mask:(0K78X,1K78X)
MC9S12XF128_UNSECURED,
MC9S12XF256_UNSECURED,
MC9S12XF384_UNSECURED,
MC9S12XF512_UNSECURED,
MC9S12XF128_SECURED,
MC9S12XF256_SECURED,
MC9S12XF384_SECURED,
MC9S12XF512_SECURED options
Mask:(0M64J,1M64J,2M64J)
in <2-MCU>->
+ Add R5F2154XX-RESET-SEC,
R5F21546E,
R5F21547E,
R5F21548E,
R5F2154AE,
R5F2154CE,
R5F21546F,
R5F21547F,
R5F21548F,
R5F2154AF,
R5F2154CF,
R5F21546G,
R5F21547G,
R5F21548G,
R5F2154AG,
R5F2154CG,
R5F21546H,
R5F21547H,
R5F21548H,
R5F2154AH,
R5F2154CH options
in <2-MCU>->
+ Add D70F3416,
D70F3417,
D70F3421,
D70F3422,
D70F3423,
D70F3424,
D70F3425,
D70F3426,
D70F3427,
D70F3433,
D70F3610,
D70F3611,
D70F3612,
D70F3613,
D70F3614,
D70F3615,
D70F3616,
D70F3617,
D70F3618,
D70F3619,
D70F3620,
D70F3621,
D70F3622,
D70F3624,
D70F3628,
D70F3634 options
in <2-MCU>->
+ Add BCM2(D70F3379),
BCM2(D70F3381/3634) options
in <4-IMMOBILIZER>->
+ Add BCM2(D70F3379),
BCM2(D70F3381/3634) options
in <4-IMMOBILIZER>->
+ Add EXCELLE(2010),
EXCELLE(2013-15),
GL8-FIRSTLAND(2007),
LACROSSE(2008) options
in <5-DASHBORAD>->
+ Add YUEXIANG(2014) option
in <5-DASHBORAD>->
+ Add FOCUS(2005),
MONDEO-CHIA-X(2009),
S-MAX(2008) options
in <5-DASHBORAD>->
+ Add LOBO(2008) option
in <5-DASHBORAD>->
+ Add FAMILY(2011-13) option
in <5-DASHBORAD>->
+ Add S-SEIRES option
in <5-DASHBORAD>->
+ Add JINBEI(2015) option
in <5-DASHBORAD>->
+ Add LANDWIND-X8 option
in <5-DASHBORAD>->
+ Add XC60(2016) option
in <5-DASHBORAD>->
+ Add FSV(2010-) option
in <5-DASHBORAD>->
+ Add SR7 option
in <5-DASHBORAD>->

SK177 VVDIProg v4.4.4              (2016-04-25)
* VVDI PROG v4.4.4 doesn’t need firmware update
* Fix some bugs
* Change some prompt information
* Fix some errors when writing some MC9S12 series EEPROMs
+ Add update information when the new software is being update
+ Add the Frequency button in MC9S12 seires UNSECURED version;
support manually set frequency, search the right frequency from
MC9S12_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add Frequency button in RENESAS-V850 series:
Support manually set frequency, search the right frequency from
V850_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add Frequency button in RENESAS-R5F61XXX series:
Support manually set frequency, search the right frequency from
R5F61XXX_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add the following options in <2-MCU>->
MC9S08AC8_UNSECURED,
MC9S08AC16_UNSECURED,
MC9S08AC32_UNSECURED,
MC9S08AC48_UNSECURED,
MC9S08AC60_UNSECURED,
MC9S08AC96_UNSECURED,
MC9S08AC128_UNSECURED,
MC9S08AW8_UNSECURED,
MC9S08AW16_UNSECURED,
MC9S08AW32_UNSECURED,
MC9S08AW48_UNSECURED,
MC9S08AW60_UNSECURED,
MC9S08DV16_UNSECURED,
MC9S08DV32_UNSECURED,
MC9S08DV48_UNSECURED,
MC9S08DV60_UNSECURED,
MC9S08DV96_UNSECURED,
MC9S08DV128_UNSECURED,
MC9S08DZ16_UNSECURED,
MC9S08DZ32_UNSECURED,
MC9S08DZ48_UNSECURED,
MC9S08DZ60_UNSECURED,
MC9S08DZ96_UNSECURED,
MC9S08DZ128_UNSECURED,
MC9S08EL16_UNSECURED,
MC9S08EL32_UNSECURED,
MC9S08FL8_UNSECURED,
MC9S08FL16_UNSECURED,
MC9S08GB32_UNSECURED,
MC9S08GB60_UNSECURED,
MC9S08GT16_UNSECURED,
MC9S08GT32_UNSECURED,
MC9S08GT60_UNSECURED,
MC9S08JS8_UNSECURED,
MC9S08JS16_UNSECURED,
MC9S08QA2_UNSECURED,
MC9S08QA4_UNSECURED,
MC9S08QD2_UNSECURED,
MC9S08QD4_UNSECURED,
MC9S08QG4_UNSECURED,
MC9S08QG8_UNSECURED,
MC9S08SE4_UNSECURED,
MC9S08SE8_UNSECURED,
MC9S08SH4_UNSECURED,
MC9S08SH8_UNSECURED,
MC9S08SL8_UNSECURED,
MC9S08SL16_UNSECURED
+ Add R5F61723 in <2-MCU>->
+ Add QUADROCYCLE(2011) in <3-ECU>->
+ Add H2-BCM in <4-IMMOBILIZER>->
+ Add Changan BENBEN,S35,JINNIUXING,YUEXIANG in <5-DASHBORAD>->
+ Add CAPTIVA(2008) in <5-DASHBORAD>->
+ Add VENUCIA-R50(2014),XIAOKANG(2014) in <5-DASHBORAD>->
+ Add BESTURN-B50,BESTURN-B90(2014),BESTURN-X80(2013),
VITA(2008) in <5-DASHBORAD>->
+ Add FOCUS(09-10) in <5-DASHBORAD>->
+ Add C30(2010) in <5-DASHBORAD>->
+ Add S5 in <5-DASHBORAD>->
+ Add LUXGEN in <5-DASHBORAD>->
+ Add QASHQAI(2011) in <5-DASHBORAD>->
+ Add BAOJUN730(2015), ROEWE550,SGMW-WULINGZHIGUANG in <5-DASHBORAD>->
+ Add S40(2006-08), S40(2010), XC60(2012) in <5-DASHBORAD>->
+ Add V5 in <5-DASHBORAD>->
+ Add Z300(2013) in <5-DASHBORAD>->
+ Add ISM-W221,LU-W221,SAM-W221 in <7-OTHER>->
+ Add RFA in <7-OTHER>->
+ Add PASSAT-B6-PBCM in <7-OTHER>->

SK177 VVDIProg  V4.4.3           (2016-03-31)
* This version DON’t need update
firmware
+ Add R5F61725 option
in <2-MCU>->
+ Add MC9S12HZ128_UNSECURED,
MC9S12HZ256_UNSECURED,
MC9S12KG128_UNSECURED,
MC9S12KG256_UNSECURED,
MC9S12KT128_UNSECURED,
MC9S12KT256_UNSECURED,
MC9S12XEA128_UNSECURED,
MC9S12XEG128_UNSECURED,
MC9S12XEA256_UNSECURED,
MC9S12XEG256_UNSECURED,
MC9S12XET256_UNSECURED,
MC9S12XEG384_UNSECURED,
MC9S12XEQ384_UNSECURED,
MC9S12XES384_UNSECURED,
MC9S12XEQ512_UNSECURED,
MC9S12XET512_UNSECURED,
MC9S12XEP768_UNSECURED,
MC9S12XEP100_UNSECURED,
MC9S12XHZ256_UNSECURED,
MC9S12XHZ384_UNSECURED,
MC9S12XHZ512_UNSECURED,
MC9S12HZ128_SECURED,
MC9S12HZ256_SECURED,
MC9S12KG128_SECURED,
MC9S12KG256_SECURED,
MC9S12KT128_SECURED,
MC9S12KT256_SECURED,
MC9S12XEA128_SECURED,
MC9S12XEG128_SECURED,
MC9S12XEA256_SECURED,
MC9S12XEG256_SECURED,
MC9S12XET256_SECURED,
MC9S12XEG384_SECURED,
MC9S12XEQ384_SECURED,
MC9S12XES384_SECURED,
MC9S12XEQ512_SECURED,
MC9S12XET512_SECURED,
MC9S12XEP768_SECURED,
MC9S12XEP100_SECURED,
MC9S12XHZ256_SECURED,
MC9S12XHZ384_SECURED,
MC9S12XHZ512_SECURED diagram
in <2-MCU>->
+ Add SGMW-HONGGUANG option
in <5-DASHBORAD>->
+ Add 315M-IN-CIRCUIT,
315M-CHIP,
434M-IN-CIRCUIT,
434M-CHIP,
868M-IN-CIRCUIT,
868M-CHIP options in
<6-REMOTE>->

SK177 VVDIProg V4.4.0      (2016-03-07)
* This version DON’t need update
  firmware
* Add the Download Link in Upgrade
  option, click it and get the last
  version software!!!
* Change the diagram interface
+ Add MC9S12C32_SECURED,
  MC9S12C64_SECURED,
  MC9S12C96_SECURED,
  MC9S12C128_SECURED
  in <2-MCU>->
  Mask:(0M66G,1M34C,1L45J,2L45J)
+ Add EIZ-W164(ST12),
  EIZ-W215(ST12),
  EIZ-W221(ST12),
  EIZ-VANEO(ST12) options
  in <4-IMMOBILIZER>->
+ Add CAPTIVA(2011) option in
  <5-DASHBORAD>->
+ Add BAOJUN330 option in
  <5-DASHBORAD>->
+ Add C70(2011) option in
  <5-DASHBORAD>->

Latest Software Version: V4.3.1

VVDIProg v4.3.1              (2016-01-27)
* This version DON’t need update
  firmware
+ Add MC9S12GN16_UNSECURED,
  MC9S12GNA16_UNSECURED,
  MC9S12GN32_UNSECURED,
  MC9S12GNA32_UNSECURED,
  MC9S12G48_UNSECURED,
  MC9S12GA48_UNSECURED,
  MC9S12GN48_UNSECURED,
  MC9S12G64_UNSECURED,
  MC9S12GA64_UNSECURED,
  MC9S12G96_UNSECURED,
  MC9S12GA96_UNSECURED,
  MC9S12G128_UNSECURED,
  MC9S12GA128_UNSECURED,
  MC9S12G192_UNSECURED,
  MC9S12GA192_UNSECURED,
  MC9S12G240_UNSECURED,
  MC9S12GA240_UNSECURED options
  Mask:(0N95B,0N51A,0N75C,1N75C,
  0N48A,1N48A)
  MC9S12HA32_UNSECURED,
  MC9S12HA48_UNSECURED,
  MC9S12HA64_UNSECURED,
  MC9S12HY32_UNSECURED,
  MC9S12HY48_UNSECURED,
  MC9S12HY64_UNSECURED options
  Mask:(0M34S)
  MC9S12P32_UNSECURED,
  MC9S12P64_UNSECURED,
  MC9S12P96_UNSECURED,
  MC9S12P128_UNSECURED options
  Mask:(0M01N)
  MC9S12XEA128_UNSECURED,
  MC9S12XEG128_UNSECURED,
  MC9S12XEA128_SECURED,
  MC9S12XEG128_SECURED options
  Mask:(1M53J,2M53J,0N36H,1N36H)
  MC9S12XHY128_UNSECURED,
  MC9S12XHY256_UNSECURED options
  Mask:(0M23Y)
  MC9S12XS64_UNSECURED,
  MC9S12XS128_UNSECURED,
  MC9S12XS256_UNSECURED options
  Mask:(0M04M,1M04M,0M05M)
  in <2-MCU>->
+ Add MC9S12XE_UNLOCK option
  in <2-MCU>->
  (Backup all data before use it)
+ Add ME20U2-XET256-BACKUP,
  ME20U2-XET512-BACKUP,
  MT22-XEP768-BACKUP,
  MT60-XEP768-BACKUP options
  in <3-ECU>->
+ Add the 12V power adaptor status
  in information dialog

 

Firmware Version: 1.2.2
v4.3.0              (2016-01-16)
* This version DON’t need update
  firmware
+ Add MC9S12XHZ256_UNSECURED,
  MC9S12XHZ384_UNSECURED,
  MC9S12XHZ512_UNSECURED,
  MC9S12XHZ256_SECURED,
  MC9S12XHZ384_SECURED,
  MC9S12XHZ512_SECURED options
  in <4-IMMOBILIZER>->
  Mask:(0M80F,1M80F)
+ Add [V850ES/Sx3]series:
  D70F3333,
  D70F3334,
  D70F3335,
  D70F3336,
  D70F3340,
  D70F3341,
  D70F3342,
  D70F3343,
  D70F3350,
  D70F3351,
  D70F3352,
  D70F3353,
  D70F3344,
  D70F3345,
  D70F3346,
  D70F3347,
  D70F3348,
  D70F3354,
  D70F3355,
  D70F3356,
  D70F3357,
  D70F3358,
  D70F3364,
  D70F3365,
  D70F3366,
  D70F3367,
  D70F3368 options
  [V850ES/Fx3]series:
  D70F3370A,
  D70F3371,
  D70F3372,
  D70F3373,
  D70F3374,
  D70F3375,
  D70F3376A,
  D70F3377A,
  D70F3378,
  D70F3379,
  D70F3380,
  D70F3381,
  D70F3382,
  D70F3383,
  D70F3384,
  D70F3385 options
  [V850ES/Hx2]series:
  D70F3700,
  D70F3701,
  D70F3702,
  D70F3703,
  D70F3704,
  D70F3706,
  D70F3707,
  D70F3709,
  D70F3710,
  D70F3711,
  D70F3712 options
  [V850E2/Fx4-G]series:
  D70F4177,
  D70F4178,
  D70F4179,
  D70F4180 options
  in <2-MCU>->
+ Add EIZ-W220(ST12)
  in <4-IMMOBILIZER>->
+ Add ORIGINAL-315M-IN-CIRCUIT,
  ORIGINAL-315M-CHIP,
  ORIGINAL-868M-IN-CIRCUIT,
  ORIGINAL-868M-CHIP options in
  <6-REMOTE>->
* Modify the EXCELLE(2013–)BCM,
  EXCELLE-GT(2013–)BCM,
  EXCELLE(2014) options in
  <4-IMMOBILIZER>->:
  Remove the D-FLASH option
* Modify the CAS4-5M48H-R/W/UNLOCK,
  CAS4-1N35H-R/W/UNLOCK options
  in <4-IMMOBILIZER>->:
  Autoset the D-FLASH partition
  size as 32K while writing the
  D-FLASH data

Main Feature:

1. The built-in update software allows user to update VVDIProg firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
Latest Software Version: V4.2.0
Firmware Version: 1.2.2

v4.1.4              (2015-12-11)
* This version DON’t need update
  firmware
* Fix when the partition size
  information error in MC9S12XE
  series chips manual set the
  partition size function error
  problem

 

Good news: SuperOBD SKP900 Key Programmer in on promotion

now it is only 549usd, before it is 599usd, save 50usd. hurry up to get it. 

Top 8 Reasons to Get SuperOBD SKP-900 SKP900 programmer:

1. Support almost all vehicles in the world, newest version V4.2
2. Don’t need pincode when programming keys for many vehicles
3. Can read pin code for many vehicles, only a few vehicles need to get pincode from other place.
4. No tokens needed. You can program as many cars as you can.
5. Low price to meet the economic crisis, cost-effective.
6. Provide lifetime Free Update Sevice,No limitation about update times now
7. Support  TOYOTA G CHIP.

8.Language :English

 

superobd-skp-900-hand-held-auto-key-programmer-1207-10

 

 

OBDSTAR X100 Pro key programmer supported Car List

Our engineers have tested the following cars for key programming function, it is good suggest for you.

Key Programming Models tested OK:

Insignia 2011 read security code +program keys OK
just make key for ford focus 2011 on 80bit tranposnder 10 min job done
Astra J 2011 X100 Pro from OBDSTAR pull pin OK
Audi a4 1998 pin read. OK
Arosa 2003 immo2 pin code no
Corsa b 1.0/1.2 pin read no, several cars, pin read by Carprog and next by x100
Corsa c 1.0/1.2 pin read no, 2 cars, pin read by Carprog and next by x100
Chevrolet cruze 2013,2012 pin reading ok,program key and remote ok,mileage ok.
Dodge Journey various models pin reading and key learning ok.
Kia rio 2012. Read pin-ok. Program new key-ok
Nissan Primera P11 2000. Chip 4D (ID60) – key programming – OK (need PIN).
Honda early model with 3pin conector ok.
Nissan Versa 2015 and 2016 read bcm,calculate pin and smart key learning ok.
Nissan Xterra 2007, reading BCM code, calculating PIN, re-adapting used key,OK
Hyundai Elantra 2010 key learning and neutralize ecm ok.
Ford Mondeo 2013 smart key *EU ok
Ford Ecosport 2013 facelift program key ok.
Ford Fiesta 2014 facelift program key ok.
Ford Focus 2010 incode bypass and program key ok.
Ford Focus 2012 key programming -OK
Ford focus 2007 pin reading OK and key coding but you need to go online to calculate pin code
Fabia 1.4 16v 2002 pin read from dash, ok
Golf 4 1997 1.6 pin read ok
Honda Jazz 1,2 2004 pin code no.
Mazda 6 2012 smart key ok transponder and remote,
Mazda 2,3,6 ok
Polo 2008 d pin read ok keys and remotes ok
Passat 2002 1,9 tdi pin read from dash, ok
Peugeot 206 2003 1.4 add new key and remote. ok U need pin code.
Touran 2007 d pin read ok
OBDSTAR X-100 Pro Failed key programming models:
Ibiza 2015 failed
AUDI a3 2011 not work, advise you can do it with VVDIVVDI 2
Hyundai Verna Fludic 2015 petrol but no communication with X-100(20th November, 2015)
98 beetle NOT OK(22nd November, 2015)
Subaru impreza 2006 not work
Hyundai I-20 no read pin code
Peugeot 307 can not read pincode for and there is no remote programming

NOTE:
All models above tested with OBDSTAR x100 pro 

x-100-pro-auto-key-programmer-c-d-type-14

a few customers met the problems of installing the mb sd c4 mb star connect compact, today i want to share the installation steps to you.

Firstly buy the item from us the latest version: http://www.chinacardiag.com/wholesale/mb-sd-c4-connect-compact-4-star-diagnosis-with-software-20133-version-of-high-quality-1851.html

And it includes the latest software, and when you get it, just insert the dell hdd or external hdd in the computer, let dell laptop as an example.

Secondly, you need to give us the related code to activate, but where can i get the code information, like hw-id, appid, hardware id and fingerprint, follow it.

Here is the pdf information:

http://www.chinacardiag.com/upload/pro/steps-to-activate-your-star-sd-c4-2016-03-version.pdf

as last, send us the code to activate, so you can use it perfectly and connect mercedes benz cars and trucks to work.

If you wanna to use it directly once get the item, you can also buy the one with laptop, we install the software well, can use it directly.

http://www.chinacardiag.com/wholesale/mb-sd-connect-compact-4-star-diagnosis-plus-dell-d630-laptop-962.html

mb-sd-c4-star-diagnosis-11

mb-sd-c4-with-dell-hdd-3 mb-sd-c4-with-dell-hdd-2 mb-sd-c4-with-dell-hdd-1

 

 

 

V6 Key Cutting machine

newest-automatic-v8-x6-key-cutting-machine-new-whole

Here we provide the details information on how to install the V6 Key Cutting machine car key database

Step 1 – Install CAR key database

Run CAR key database to install

Click Next to install CAR key database

key-cutting

Select installation location, then click Next

Click Install to begin installation

CAR key database installation success! Click Finish.

install-X6-key-machine-database-2

Step 2 – Register X6 key machine

Open Car key database on Desktop

install-X6-key-machine-database-3

Enter registration details, then click Reigister

install-X6-key-machine-database-4

Activate X6 via telephone

install-X6-key-machine-database-6install-X6-key-machine-database-5

 

Run Kegen, enter activation reference to get activation code

Then enter activation code for database

install-X6-key-machine-database-7

Information (it is recomended that you take a minute to …) pops up, click ok

Setup wizard

install-X6-key-machine-database-8

Enter password; if not exist without password (it’s okay)

Step 3 – read key info

Enter info to Find the same code series…

install-X6-key-machine-database-9

Mactching series (9): Holden SU17UTK30

install-X6-key-machine-database-11install-X6-key-machine-database-10

 

 

OBDSTAR VAG PRO Auto Key Programmer is very professional handheld device mainly for VW, AUDI, SKODA, SEAT in programming and setting.
main function: Car diagnostic function, immobilizer programming, Oil / Service light reset,EPB reset, remote transponder programming, Airbag Reset etc.
obdstar-vag-pro
As to the specific AUDI Diagnostic function, we are glad to share with you.
Diagnostic function
01 Engine
09 Central control
17 Dashboard
25 Immobiliser
35 Central lock
46 Central comfort module
02 Transmission Electronics
03 Brake Electronics
15 Airbags
08 AC/Heating Electronics
56 Radio
19 Gateway Data Bus
45 Interior Monitoring
16 Steering Wheel Electronics
22 4WD Electronics
37 Navigation
11 Engine Electronics 2
21 Engine Electronics 3
47 Soundsystem
12 Clutch Electronics
34 Self Leveling Suspension
44 Steering Assistance
14 Wheel Damping Electronics
18 Aux Heating
13 Distance Control
26 Electric Roof Control
29 Left Light Control
39 Right Light Control
49 Auto. Lighting Switch
51 Electric Drive
61 Battery Control
75 Emergency Call Module
76 Parking Aid
24 Drive Slip Control
36 Driver`s Side Seat Adj.
41 Diesel Pump Electronics
55 Headlight Range Control
65 Tyre Pressure Monitoring
66 Seat-/Mirror Adjust.
71 Battery Charger
42 Driver-door Elect.
52 Passe. Door Elect.
62 LR-Door Electroni.
72 RR-Door Electroni.
23 Braker Booster
43 Braker Boost.Assi.
63 Drvs Boarding Ass1
73 Drvs Boarding Ass2
54 Rear Spoiler
05 Access & Permissi.
06 Passeng. Seat Adj.
07 Display-/Cntl Unit
27 Dis./Ctl Unit Rear
57 TV-Tuner
67 Voice Control
77 Telephone
38 Roof Electronics
48 Drvs Seat Adj.Rear
68 Wiper Electronics
78 Sliding Door
59 Towing Protection
69 Trailer Function
28 Climate Control Unit Rear
31 Engine Electronics Conjunct.
32 Locking Electronisc
53 Parking Brake
58 Auxiliary Fuel Tank
64 Stabilizers
1C Vehicle Position Detection
2D Voice Amplification
3D Special Function
6E Roof Display/Control Head
7E Ind.Unit in Inst.Panel Ins.
0D Sliding Door Left
7D Auxiliary Heater
0F Radio Tuner-Digital
1F Radio Satellite
2F TV Tuner-Digital
1D Driver Identification
0E Media Player Position 1
1E Media Player Position 2
2E Media Player Position 3
3E Media Player Position 4
4E Control Head RR
5E Control Head LR
4F Electronic Central Electric II
04 Steering Position
74 Vehicle Control System
3C Lane Departure Assistance System
4C Tyre Pressure Monitor II
5C Lane Keeping Assistance System
6C Rear Camera
5D Opertion
6D Electronic Equipment of Trunk Lid
0B Auxiliary Air Heater
5F Information Electronic Equipment 1
6F Confort Central Control Unit II
1B Power-Assisted Steering
10 Parking Assist System 2
20 High Beam Assistance Device
30 Special Function 2
7F Information Electronic Equipment 2
2B Steer Col Lock
3B Sensor Elect.
85 On Board Cam.
89 Multicont. Seat Pass.
8B Adaptive Cruise 2
8E Image Processing
8F Pretens. Frt Left
90 Pretens. Frt Right
82 Heads Up Display
4B Multifunction Module
5B Seat Adjustment Rear Passenger Side
6B Aerodynamics Control Module
A5 Frt Sens.Drv.Assist
A6 Microphone
A7 Radio
A9 Struct.Borne Sound
AC Reductant Control
AD Brake Sensors
B7 Access Start Interf
B8 Elect.Roof 2
B9 Aux.Display
BA Motor Mounts
BB Door Rear Drv Side
BC Door Rear Pass Side
BD Hi Vlot. Batt. Charger
BE Sliding Door Left
BF Sliding Door Right
C0 Act. For Ext. Noise
C6 Batt. Chrg
C7 Pedestrian Protec.
Read security code
17 Dashboard
Auto
A4 RB8 2006-2007
Manual
25 Immobiliser
Auto
Manual
01 Engine
Auto
Manual
Program keys
17 Dashboard
25 Immobiliser
Program remote
35 Central lock(KWP1281)
46 Central comfort module(KWP1281)

 

Programming Ford Focus 2015 year immo key with new Magic Wand 4C 4D transponder chip generator
items used:
Chip 4D70
Operation:
Test  original transponder key with Quickly key copy machine
Choose read or copy
1
Quickly key programmer identified the chip as ID83
2
Try to start the car with the original key
It is working.Test new transponder
Choose read or copy
The chip is identified as 4D 70
3
Try to ignition on the car
It is not working.Format 4D 70 to 83 by Magic Wand 
4
Insert a new transponder key & ignition on
5
Then program Ford Focus key with OBDSTAR F100
6
Plug the OBDSTAR F-100 into the OBD socket
Select Immo key programming function
Select Ford/Lincoln 
Check Ford Linocln software V31.22
F-100 initializing
Select Ford
Select Immobilizer System
Select Focus
Select New Focus
This car is 2015 year, so then we choose Type 2(2014-)
7
Choose “Programming a new key”
F100 prompt “Insert a new transponder key & ignition on”
reading pin code
ignition off
ignition on
now we own 4 keys could start this car
programming key in procedure
8
It  takes about 4 min to program
Now we get pincode
9
now we own 5 keys could start this car
10

How to Use BMW ENET (Ethernet to OBD) Cable E-SYS to encode BMW F-series?

Bmw Coding Database

http://www.bmwcodingdatabase.com/

E-Sys (Includes E-Sys v.3.26.1 & E-Sys Launcher Premium 1:05 (w / Builtin Token Generator) & Guides):

https://mega.co.nz/#!p5JijaKY!DrkkiLi9AUebQOp1sTC0ywopaKXqzEqjYx7Oz45jU14

* NOTE: If wanna update the old version E-Sys, first uninstall current E-Sys version via Windows Control Panel.

“E-Sys – Installation Instructions – v.8.pdf” (E-Sys Installation & Setup Guide):

http://www.uobd2.net/upload/pro/bmw-enet-ethernet-to-obd-interface-cable-installation-instruction.pdf

v.54.2_PSdZData_Lite:

https://mega.co.nz/#F!dghFRQgY!79e-cyQ3sFVISPH02g6x4g

* NOTE: 54.2 PSdZData Lite Version has the SWFL files removed Which are needed only for flashing new onto ECU’s firmware, and ARE NOT needed at all for any coding, so you get a time and bandwidth friendly 6.4 Gb download instead of the 25.3 Gb download , and- When extracted it is 9.4 Gb instead of 34.2 Gb, saving 24.8 Gb of Hard Drive space.

Or if you actually need the full version is Flashing:

v.54.2_PSdZData_Full:

https://mega.co.nz/#F!Zo4UCKrT!gq2ekXxtVsT7xZgf-7xE5g

* NOTE: 54.x PSdZData requires E-Sys 3.23.4 or higher version.

* NOTE: If upgrading from a previous version PSdZData, DELETE and REPLACE old PSdZData folder with new PSdZData folder (Do NOT copy (merge) PSdZData new folder on on top of old PSdZData folder).

* NOTE: Downloading files from MEGA is best accomplished by disabling any AntiVirus software, and using Chrome Browser with the MEGA Extension. Do NOT use Firefox. For muti-part rar archives, you must download all parts, And Then When finished, open only part1.rar, and it will automatically process all parts of the .rar archive.

enet-ethernet-to-obd-interface-cable-e-sys-icom-coding-f-series-for-bmw-package